Stop a Constantly Running Toilet: Marietta Plumbing Repair & DIY Fixes by Local Experts
Stop a Constantly Running Toilet in Marietta Homes
Trouble With Toilets in Marietta? You're Not Alone!
Many homeowners around Marietta Square and Laurel Springs know how frustrating a toilet that keeps running can be. It wastes water, increases your bill, and might signal a larger problem inside your bathroom. In older Marietta homes, this issue is especially common, but even newer properties are not immune.
Learning what causes this trouble and how to fix it quickly can save you money and stress. K L Contractor Plumbing Inc. helps homeowners across Marietta solve these problems fast and prevent bigger plumbing headaches.
Why Your Toilet Won't Stop Running
When a toilet keeps running after you flush, it often means something inside the tank is not working right. The two most common causes are:
- A worn-out or faulty flapper
- Problems with the fill valve
1. Flapper Issues
The flapper is a rubber piece at the bottom of your toilet tank. Every time you flush, it lifts to let water flow into the bowl. Over time, flappers can get old, warped, or lose their seal. When this happens, water keeps leaking into the bowl and the tank keeps refilling.
In Marietta, homes built in earlier decades often still have the original flapper. Hard water or cleaning chemicals can also speed up wear and tear. If you hear your toilet filling up without anyone flushing, a bad flapper is the likely culprit.
2. Fill Valve Problems
The fill valve lets water flow into the tank after each flush. Sometimes the valve won’t shut off completely. This can happen if dirt gets inside, or if the float—part of the fill valve—sticks in the wrong position.
When the fill valve is at fault, you may notice a slow trickle of water down the inside of your toilet bowl. This can waste hundreds of gallons per month in homes across Marietta, quickly increasing your water bill.
Quick Fixes to Try at Home
If you want to try fixing the problem yourself before calling a professional, here are a few simple steps:
- Lift the toilet tank lid and check the flapper for signs of wear, cracks, or poor fit.
- Wiggle the float to see if it moves freely. If it sticks, gently adjust it.
- If the fill valve looks dirty, flush out any debris by turning the water supply off and on again.
- Replace the flapper or fill valve if you notice obvious damage. Replacement parts are found at most Marietta hardware stores.
These steps work for many toilet brands and models. If the toilet keeps running or you feel unsure, it is safest to contact K L Contractor Plumbing Inc. for help. Our team has fixed thousands of running toilets in Marietta, from historic homes in the square to modern builds in Laurel Springs.
Why Fast Repairs Matter in Marietta
Ignoring a running toilet leads to more than annoyance. A small part like a flapper can cost just a few dollars, but wasted water from a running toilet can mean a much higher bill each month. Marietta’s water rates can add up, making speedy repairs important for your budget.
Fixing these issues also keeps your plumbing system healthy. Constant running can wear out other parts and signal possible leaks, especially in older homes around Marietta Square.
Call Marietta’s Trusted Plumbers
If you need fast, honest plumbing help, call K L Contractor Plumbing Inc. Our experienced plumbers serve Laurel Springs, Marietta Square, and the greater Marietta area. We solve running toilet problems quickly and explain repairs in simple terms so you can make confident choices for your home.
Call us at 404-637-2796 today for expert toilet repair, or get help in Marietta.
Learn more: https://klplumbing.com/
K L Contractor Plumbing Inc.
4901 Olde Towne Pkwy Suite 100, Marietta, GA
Call: 404-637-2796
Comments
Post a Comment